날마다 새롭게 또 날마다 새롭게

maple210 정상 부팅 로그 본문

프로그래밍/Embeded S/W

maple210 정상 부팅 로그

아무유 2013. 1. 11. 14:27

loglevel : 6


U-Boot 1.3.4 (Dec 21 2012 - 18:58:51) for MAPLE210


CPU:  S5PV210@800MHz(OK)
        APLL = 800MHz, HclkMsys = 200MHz, PclkMsys = 100MHz
        MPLL = 667MHz, EPLL = 80MHz
                       HclkDsys = 166MHz, PclkDsys = 83MHz
                       HclkPsys = 133MHz, PclkPsys = 66MHz
                       SCLKA2M  = 200MHz
Serial = CLKUART 
Board:   MAPLE210
DRAM:    512 MB
SD/MMC:  3849MB
NAND:    0 MB 
*** Warning - using default environment

In:      serial
Out:     serial
Err:     serial
Hit any key to stop autoboot:  0 
reading kernel.. 1073, 8192 
MMC read: dev # 0, block # 1073, count 8192 ...8192 blocks read: OK
completed
Boot with zImage

Starting kernel ...

Uncompressing Linux................................................................
Initializing cgroup subsys cpu
Linux version 2.6.32.9 (jtl@jtl) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) 2
CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f
CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Machine: MAPLE210
Ignoring unrecognised tag 0x41001099
Memory policy: ECC disabled, Data cache writeback
Truncating RAM at 40000000-4fffffff to -4affffff (vmalloc region overlap).
CPU S5PV210/S5PC110 (id 0x43110220)
S3C24XX Clocks, Copyright 2004 Simtec Electronics
copy: bad source 0
mout_audss: bad source 0
S5PV210: PLL settings, A=800000000, M=667000000, E=80000000
s5pv210: 36864 KB system memory reserved for mfc at bank[1] 0x40000000
s5pv210: 36864 KB system memory reserved for mfc at bank[1] 0x42400000
s5pv210: 14336 KB system memory reserved for fimc0 at bank[1] 0x44800000
s5pv210: 16384 KB system memory reserved for fimc1 at bank[1] 0x45600000
s5pv210: 3072 KB system memory reserved for fimc2 at bank[1] 0x46600000
s5pv210: 16384 KB system memory reserved for pmem at bank[1] 0x46900000
s5pv210: 10240 KB system memory reserved for pmem_gpu1 at bank[1] 0x47900000
s5pv210: 6144 KB system memory reserved for pmem_adsp at bank[1] 0x48300000
s5pv210: 8192 KB system memory reserved for jpeg at bank[1] 0x48900000
s5pv210: 10240 KB system memory reserved for texstream at bank[1] 0x49100000
s5pv210: 10240 KB system memory reserved for fimd at bank[1] 0x49b00000
s5pv210: 16384 KB system memory reserved for g2d at bank[1] 0x20b7a000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 109216
Kernel command line: root=/dev/mmcblk0p2 rootfstype=ext3 console=ttySAC2,115200 ro1
PID hash table entries: 2048 (order: 1, 8192 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 256MB 176MB = 432MB total
Memory: 244736KB available (5244K code, 1432K data, 520K init, 0K highmem)
SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:339
VIC @f4000000: id 0x00041192, vendor 0x41
VIC @f4010000: id 0x00041192, vendor 0x41
VIC @f4020000: id 0x00041192, vendor 0x41
vic_pm_register: too few VICs, increase CONFIG_ARM_VIC_NR
VIC @f4030000: id 0x00041192, vendor 0x41
vic_pm_register: too few VICs, increase CONFIG_ARM_VIC_NR
mult[140737]
max_delta_ns[2147483647]
min_delta_ns[30517]
rate[32768]
HZ[256]
Console: colour dummy device 80x30
console [ttySAC2] enabled
Calibrating delay loop... 796.20 BogoMIPS (lpj=1556480)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
  

regulator: core version 0.5
NET: Registered protocol family 16
S5PC110 Hardware version : EVT1 
S3C Power Management, Copyright 2004 Simtec Electronics
S5PV210 Power Domain API Enable
S5PV210: Initializing architecture
S3C PL330-DMA Controller Driver, (c) 2008-2009 Samsung Electronics
Total 24 DMA channels will be initialized.
s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0
s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8
s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12
s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16
bio: create slab <bio-0> at 0
s3c-i2c s3c2410-i2c.1: slave address 0x10
s3c-i2c s3c2410-i2c.1: bus frequency set to 81 KHz
s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource clock_source_systimer
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
NET: Registered protocol family 1
cpuidle: phy_regs_save:0x4a9ff000
ashmem: initialized
NTFS driver 2.1.29 [Flags: R/W DEBUG].
msgmni has been set to 478
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler cfq registered (default)
i2c /dev entries driver
i2c-gpio i2c-gpio.0: using pins 40 (SDA) and 41 (SCL)
i2c-gpio i2c-gpio.2: using pins 44 (SDA) and 45 (SCL)
Linux video capture interface: v2.00
IPC probe success
mfc_init: <6>S5PC110 MFC Driver, (c) 2009 Samsung Electronics

S3C JPEG Driver, (c) 2007 Samsung Electronics
JPEG driver for S5PV210 
i2c i2c-1: attached s5p_ddc into i2c adapter successfully
S5PC11X HPD Driver, (c) 2009 Samsung Electronics
S5PC11X CEC Driver, (c) 2009 Samsung Electronics
s3cfb s3cfb: [fb2] dma: 0x49b00000, cpu: 0xed000000, size: 0x002ee000
fbcon: s3cfb (fb0) is primary device
Console: switching to colour frame buffer device 100x30
FIMD src sclk = 133400000
s3cfb s3cfb: registered successfully
s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10
s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10
s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10
brd: module loaded
loop: module loaded
pmem: 1 init
pmem_gpu1: 1 init
pmem_adsp: 1 init
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
Samsung SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves attached
        Max,Min-Speed [33350000, 130273]Hz
        Irq=79  IOmem=[0xe1300fff-0xe1300000]   DMA=[Rx-30, Tx-31]
smsc911x: Driver version 2008-10-21.
smsc911x-mdio: probed
eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1)
net eth0: MAC Address: f2:8d:27:9c:98:8e
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver cdc_subset
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
s5pv210-ehci s5pv210-ehci: s5pv210 EHCI
s5pv210-ehci s5pv210-ehci: new USB bus registered, assigned bus number 1
s5pv210-ehci s5pv210-ehci: irq 87, io mem 0xec200000
s5pv210-ehci s5pv210-ehci: USB 0.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
s5pv210-ohci s5pv210-ohci: s5pv210 OHCI
s5pv210-ohci s5pv210-ohci: new USB bus registered, assigned bus number 2
s5pv210-ohci s5pv210-ohci: irq 87, io mem 0xec300000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver cdc_wdm
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
s3c-udc : S3C HS USB OTG Device Driver, (c) 2008-2009 Samsung Electronics
s3c-udc : version 15 March 2009 (DMA Mode) 
android init
android_probe pdata: c0609c98
android_bind
android_usb gadget: android_usb ready
Registered gadget driver 'android_usb'
f_adb init
android_register_function adb
f_mass_storage init
android_register_function usb_mass_storage
mass_storage_bind_config
fsg_probe pdata: c0609cbc
android_usb gadget: Number of LUNs=1
adb_bind_config
mice: could not register psaux device, error: -16
mice: PS/2 mouse device common for all mice
input: maple-keys as /devices/platform/maple-keys.0/input/input0
S5P Touchscreen driver, (c) 2008 Samsung Electronics
S5P TouchScreen got loaded successfully : 12 bits
input: S5P TouchScreen as /devices/virtual/input/input1
S3C24XX RTC, (c) 2004,2006 Simtec Electronics
using rtc device, s3c, for alarms
s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0
S3C2410 Watchdog Timer, (c) 2004 Simtec Electronics
s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled
cpuidle: using governor ladder
cpuidle: using governor menu
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe
s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)
mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA
drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe
s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)
mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA
drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe
s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)
mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA
drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe
s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)
mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
logger: created 64K log 'log_main'
logger: created 256K log 'log_events'
logger: created 64K log 'log_radio'
logger: created 64K log 'log_system'
Advanced Linux Sound Architecture Driver Version 1.0.21.
WM8960 I2C Codec 0-001a: No platform data supplied
mmc0: new high speed SDHC card at address b368
mmcblk0: mmc0:b368 USD   3.75 GiB 
 mmcblk0: p1 p2
s3c_idma_preallocate_buffer:  VA-eb900000  PA-C0000000  163840bytes
s3c_preallocate_dma_buffer: VA-ff010000, PA-4AA80000, 131072bytes
asoc: WM8960 <-> s3c64xx-i2s mapping ok
s3c_idma_preallocate_buffer:  VA-eb940000  PA-C0000000  163840bytes
s3c_preallocate_dma_buffer: VA-ff030000, PA-4AAA0000, 131072bytes
asoc: WM8960 <-> s3c64xx-i2s mapping ok
ASoC: Failed to create HP-L/R debugfs file
ASoC: Failed to create Speaker-L/R debugfs file
ALSA device list:
  #0: maple (WM8960)
TCP cubic registered
NET: Registered protocol family 17
lib80211: common routines for IEEE802.11 drivers
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2
NOON130PC20 0-0020: noon130pc20 has been probed
NOON130PC20 0-0020: fetching platform data
NOON130PC20 0-0020: parallel mode
FIMC0 registered successfully
FIMC1 registered successfully
FIMC2 registered successfully
S5PC1XX TVOUT Driver, (c) 2009 Samsung Electronics
s5p-tvout s5p-tvout: hpd status is cable removed
s3c2410-rtc s3c2410-rtc: drivers/rtc/hctosys.c[39]: invalid system time -> set to  
s3c2410-rtc s3c2410-rtc: setting system clock to 2010-12-29 11:30:30 UTC (12936222)
Waiting 1sec before mounting root device...
kjournald starting.  Commit interval 5 seconds
EXT3 FS on mmcblk0p2, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
VFS: Mounted root (ext3 filesystem) on device 179:2.
Freeing init memory: 520K
Warning: unable to open an initial console.
init: cannot open '/initlogo.rle'
init: command 'loglevel' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'export' r=0
init: command 'insmod' r=0
PA FB = 0x49B00000, bits per pixel = 32
screen width=800 height=480 va=0xe9b00000 pa=0x49b00000
Back frameBuffer[0].VAddr=e9c77000 PAddr=49c77000 size=1536000
init: command 'insmod' r=0
s3c_get_media_memory_bank : invalid media device(id:9,bank:0)
init: command 'insmod' r=0
init: command 'symlink' r=0
init: command 'symlink' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mount' r=-1
init: command 'mkdir' r=0
init: command 'symlink' r=0
init: command 'mkdir' r=-17
init: command 'mkdir' r=-17
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mount' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'mount' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'write' r=-22
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'write' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'write' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'copy' r=-1
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'copy' r=-1
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'write' r=-2
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=-2
init: command 'chmod' r=-2
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=-17
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'mkdir' r=0
init: command 'mkdir' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: Created socket '/dev/socket/property_service' with mode '666', user '0', gro'
init: processing action 0x2aab0 (boot)
init: command 'ifup' r=0
init: command 'hostname' r=0
init: command 'domainname' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'insmod' r=-1
init: command 'setrlimit' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'write' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chmod' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=-2
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'chown' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: command 'setprop' r=0
init: starting 'console'
init: starting 'pvrsrvinit'
init: starting 'servicemanager'
init: starting 'vold'
init: starting 'netd'
init: starting 'debuggerd'
init: starting 'zygote'
init: starting 'media'
init: starting 'dbus'
init: starting 'ifcfg_eth0'
init: starting 'installd'
init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
init: starting 'keystore'
init: starting 'dhcpcd'
init: command 'class_start' r=0
init: processing action 0x2b858 (property:persist.service.adb.enable=1)
init: starting 'adbd'
init: command 'start' r=0
PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [473, services4/syste]
init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
init: waitpid returned pid 891, status = 00000000
init: process 'pvrsrvinit', pid 891 exited
init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'
sh-4.0# init: Created socket '/dev/socket/dbus' with mode '666', user '1002', grou'
net eth0: SMSC911x/921x identified at 0xeb8a6000, IRQ: 43
init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'
init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1'
init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'
warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)
enabling adb
adb_open
s3c-fimc: FIMC2 1 opened.
init: starting 'bootanim'
init: waitpid returned pid 899, status = 0000ff00
init: process 'ifcfg_eth0', pid 899 exited
request_suspend_state: wakeup (3->0) at 87559646103 (2010-12-29 11:31:55.614276321)
binder: release 1056:1056 transaction 2082 out, still active
binder: 953:1089 transaction failed 29189, size 4-0
binder: send failed reply for transaction 2082, target dead
init: service 'bootanim' is being killed
init: waitpid returned pid 966, status = 0000000f
init: process 'bootanim', pid 966 exited
binder: release 1122:1143 transaction 2865 out, still active

0 Comments
댓글쓰기 폼