maple210 정상 부팅 로그

Notice

Recent Posts

Recent Comments

Link

« 2024/12 »
일	월	화	수	목	금	토
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30	31

Tags more

Archives

Today

Total

관리 메뉴

날마다 새롭게 또 날마다 새롭게

maple210 정상 부팅 로그 본문

프로그래밍/Embeded S/W

maple210 정상 부팅 로그

아무유 2013. 1. 11. 14:27

loglevel : 6

U-Boot 1.3.4 (Dec 21 2012 - 18:58:51) for MAPLE210

CPU: S5PV210@800MHz(OK)

APLL = 800MHz, HclkMsys = 200MHz, PclkMsys = 100MHz

MPLL = 667MHz, EPLL = 80MHz

HclkDsys = 166MHz, PclkDsys = 83MHz

HclkPsys = 133MHz, PclkPsys = 66MHz

SCLKA2M = 200MHz

Serial = CLKUART

Board: MAPLE210

DRAM: 512 MB

SD/MMC: 3849MB

NAND: 0 MB

*** Warning - using default environment

In: serial

Out: serial

Err: serial

Hit any key to stop autoboot: 0

reading kernel.. 1073, 8192

MMC read: dev # 0, block # 1073, count 8192 ...8192 blocks read: OK

completed

Boot with zImage

Starting kernel ...

Uncompressing Linux................................................................

Initializing cgroup subsys cpu

Linux version 2.6.32.9 (jtl@jtl) (gcc version 4.4.1 (Sourcery G++ Lite 2009q3-67) 2

CPU: ARMv7 Processor [412fc082] revision 2 (ARMv7), cr=10c53c7f

CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache

Machine: MAPLE210

Ignoring unrecognised tag 0x41001099

Memory policy: ECC disabled, Data cache writeback

Truncating RAM at 40000000-4fffffff to -4affffff (vmalloc region overlap).

CPU S5PV210/S5PC110 (id 0x43110220)

copy: bad source 0

mout_audss: bad source 0

S5PV210: PLL settings, A=800000000, M=667000000, E=80000000

s5pv210: 36864 KB system memory reserved for mfc at bank[1] 0x40000000

s5pv210: 36864 KB system memory reserved for mfc at bank[1] 0x42400000

s5pv210: 14336 KB system memory reserved for fimc0 at bank[1] 0x44800000

s5pv210: 16384 KB system memory reserved for fimc1 at bank[1] 0x45600000

s5pv210: 3072 KB system memory reserved for fimc2 at bank[1] 0x46600000

s5pv210: 16384 KB system memory reserved for pmem at bank[1] 0x46900000

s5pv210: 10240 KB system memory reserved for pmem_gpu1 at bank[1] 0x47900000

s5pv210: 6144 KB system memory reserved for pmem_adsp at bank[1] 0x48300000

s5pv210: 8192 KB system memory reserved for jpeg at bank[1] 0x48900000

s5pv210: 10240 KB system memory reserved for texstream at bank[1] 0x49100000

s5pv210: 10240 KB system memory reserved for fimd at bank[1] 0x49b00000

s5pv210: 16384 KB system memory reserved for g2d at bank[1] 0x20b7a000

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 109216

Kernel command line: root=/dev/mmcblk0p2 rootfstype=ext3 console=ttySAC2,115200 ro1

PID hash table entries: 2048 (order: 1, 8192 bytes)

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 256MB 176MB = 432MB total

Memory: 244736KB available (5244K code, 1432K data, 520K init, 0K highmem)

SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

Hierarchical RCU implementation.

NR_IRQS:339

VIC @f4000000: id 0x00041192, vendor 0x41

VIC @f4010000: id 0x00041192, vendor 0x41

VIC @f4020000: id 0x00041192, vendor 0x41

vic_pm_register: too few VICs, increase CONFIG_ARM_VIC_NR

VIC @f4030000: id 0x00041192, vendor 0x41

vic_pm_register: too few VICs, increase CONFIG_ARM_VIC_NR

mult[140737]

max_delta_ns[2147483647]

min_delta_ns[30517]

rate[32768]

HZ[256]

Console: colour dummy device 80x30

console [ttySAC2] enabled

Calibrating delay loop... 796.20 BogoMIPS (lpj=1556480)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

regulator: core version 0.5

NET: Registered protocol family 16

S5PC110 Hardware version : EVT1

S5PV210 Power Domain API Enable

S5PV210: Initializing architecture

Total 24 DMA channels will be initialized.

s3c24xx-pwm s3c24xx-pwm.0: tin at 66700000, tdiv at 66700000, tin=divclk, base 0

s3c24xx-pwm s3c24xx-pwm.1: tin at 66700000, tdiv at 66700000, tin=divclk, base 8

s3c24xx-pwm s3c24xx-pwm.2: tin at 4168750, tdiv at 4168750, tin=divclk, base 12

s3c24xx-pwm s3c24xx-pwm.3: tin at 4168750, tdiv at 4168750, tin=divclk, base 16

bio: create slab <bio-0> at 0

s3c-i2c s3c2410-i2c.1: slave address 0x10

s3c-i2c s3c2410-i2c.1: bus frequency set to 81 KHz

s3c-i2c s3c2410-i2c.1: i2c-1: S3C I2C adapter

vgaarb: loaded

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

Switching to clocksource clock_source_systimer

NET: Registered protocol family 2

IP route cache hash table entries: 4096 (order: 2, 16384 bytes)

TCP established hash table entries: 16384 (order: 5, 131072 bytes)

TCP bind hash table entries: 16384 (order: 6, 327680 bytes)

TCP: Hash tables configured (established 16384 bind 16384)

TCP reno registered

NET: Registered protocol family 1

cpuidle: phy_regs_save:0x4a9ff000

ashmem: initialized

NTFS driver 2.1.29 [Flags: R/W DEBUG].

msgmni has been set to 478

alg: No test for stdrng (krng)

io scheduler noop registered

io scheduler cfq registered (default)

i2c /dev entries driver

i2c-gpio i2c-gpio.0: using pins 40 (SDA) and 41 (SCL)

i2c-gpio i2c-gpio.2: using pins 44 (SDA) and 45 (SCL)

Linux video capture interface: v2.00

IPC probe success

JPEG driver for S5PV210

i2c i2c-1: attached s5p_ddc into i2c adapter successfully

s3cfb s3cfb: [fb2] dma: 0x49b00000, cpu: 0xed000000, size: 0x002ee000

fbcon: s3cfb (fb0) is primary device

Console: switching to colour frame buffer device 100x30

FIMD src sclk = 133400000

s3cfb s3cfb: registered successfully

s5pv210-uart.0: s3c2410_serial0 at MMIO 0xe2900000 (irq = 16) is a S3C6400/10

s5pv210-uart.1: s3c2410_serial1 at MMIO 0xe2900400 (irq = 20) is a S3C6400/10

s5pv210-uart.2: s3c2410_serial2 at MMIO 0xe2900800 (irq = 24) is a S3C6400/10

brd: module loaded

loop: module loaded

pmem: 1 init

pmem_gpu1: 1 init

pmem_adsp: 1 init

Uniform Multi-Platform E-IDE driver

ide-gd driver 1.18

Samsung SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves attached

Max,Min-Speed [33350000, 130273]Hz

Irq=79 IOmem=[0xe1300fff-0xe1300000] DMA=[Rx-30, Tx-31]

smsc911x: Driver version 2008-10-21.

smsc911x-mdio: probed

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:01, irq=-1)

net eth0: MAC Address: f2:8d:27:9c:98:8e

usbcore: registered new interface driver cdc_ether

usbcore: registered new interface driver cdc_subset

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

s5pv210-ehci s5pv210-ehci: s5pv210 EHCI

s5pv210-ehci s5pv210-ehci: new USB bus registered, assigned bus number 1

s5pv210-ehci s5pv210-ehci: irq 87, io mem 0xec200000

s5pv210-ehci s5pv210-ehci: USB 0.0 started, EHCI 1.00

usb usb1: configuration #1 chosen from 1 choice

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 1 port detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

s5pv210-ohci s5pv210-ohci: s5pv210 OHCI

s5pv210-ohci s5pv210-ohci: new USB bus registered, assigned bus number 2

s5pv210-ohci s5pv210-ohci: irq 87, io mem 0xec300000

usb usb2: configuration #1 chosen from 1 choice

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 1 port detected

uhci_hcd: USB Universal Host Controller Interface driver

usbcore: registered new interface driver cdc_wdm

Initializing USB Mass Storage driver...

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

s3c-udc : version 15 March 2009 (DMA Mode)

android init

android_probe pdata: c0609c98

android_bind

android_usb gadget: android_usb ready

Registered gadget driver 'android_usb'

f_adb init

android_register_function adb

f_mass_storage init

android_register_function usb_mass_storage

mass_storage_bind_config

fsg_probe pdata: c0609cbc

android_usb gadget: Number of LUNs=1

adb_bind_config

mice: could not register psaux device, error: -16

mice: PS/2 mouse device common for all mice

input: maple-keys as /devices/platform/maple-keys.0/input/input0

S5P TouchScreen got loaded successfully : 12 bits

input: S5P TouchScreen as /devices/virtual/input/input1

using rtc device, s3c, for alarms

s3c2410-rtc s3c2410-rtc: rtc core: registered s3c as rtc0

s3c2410-wdt s3c2410-wdt: watchdog inactive, reset disabled, irq enabled

cpuidle: using governor ladder

cpuidle: using governor menu

sdhci: Secure Digital Host Controller Interface driver

sdhci: Copyright(c) Pierre Ossman

drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe

s3c-sdhci s3c-sdhci.0: clock source 2: sclk_mmc (47642857 Hz)

mmc0: SDHCI controller on samsung-hsmmc [s3c-sdhci.0] using ADMA

drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe

s3c-sdhci s3c-sdhci.1: clock source 2: sclk_mmc (47642857 Hz)

mmc1: SDHCI controller on samsung-hsmmc [s3c-sdhci.1] using ADMA

drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe

s3c-sdhci s3c-sdhci.2: clock source 2: sclk_mmc (47642857 Hz)

mmc2: SDHCI controller on samsung-hsmmc [s3c-sdhci.2] using ADMA

drivers/mmc/host/sdhci-s3c.c sdhci_s3c_probe

s3c-sdhci s3c-sdhci.3: clock source 2: sclk_mmc (47642857 Hz)

mmc3: SDHCI controller on samsung-hsmmc [s3c-sdhci.3] using ADMA

usbcore: registered new interface driver usbhid

usbhid: v2.6:USB HID core driver

logger: created 64K log 'log_main'

logger: created 256K log 'log_events'

logger: created 64K log 'log_radio'

logger: created 64K log 'log_system'

Advanced Linux Sound Architecture Driver Version 1.0.21.

WM8960 I2C Codec 0-001a: No platform data supplied

mmc0: new high speed SDHC card at address b368

mmcblk0: mmc0:b368 USD 3.75 GiB

mmcblk0: p1 p2

s3c_idma_preallocate_buffer: VA-eb900000 PA-C0000000 163840bytes

s3c_preallocate_dma_buffer: VA-ff010000, PA-4AA80000, 131072bytes

asoc: WM8960 <-> s3c64xx-i2s mapping ok

s3c_idma_preallocate_buffer: VA-eb940000 PA-C0000000 163840bytes

s3c_preallocate_dma_buffer: VA-ff030000, PA-4AAA0000, 131072bytes

asoc: WM8960 <-> s3c64xx-i2s mapping ok

ASoC: Failed to create HP-L/R debugfs file

ASoC: Failed to create Speaker-L/R debugfs file

ALSA device list:

#0: maple (WM8960)

TCP cubic registered

NET: Registered protocol family 17

lib80211: common routines for IEEE802.11 drivers

VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 2

NOON130PC20 0-0020: noon130pc20 has been probed

NOON130PC20 0-0020: fetching platform data

NOON130PC20 0-0020: parallel mode

FIMC0 registered successfully

FIMC1 registered successfully

FIMC2 registered successfully

s5p-tvout s5p-tvout: hpd status is cable removed

s3c2410-rtc s3c2410-rtc: drivers/rtc/hctosys.c[39]: invalid system time -> set to

s3c2410-rtc s3c2410-rtc: setting system clock to 2010-12-29 11:30:30 UTC (12936222)

Waiting 1sec before mounting root device...

kjournald starting. Commit interval 5 seconds

EXT3 FS on mmcblk0p2, internal journal

EXT3-fs: mounted filesystem with writeback data mode.

VFS: Mounted root (ext3 filesystem) on device 179:2.

Freeing init memory: 520K

Warning: unable to open an initial console.

init: cannot open '/initlogo.rle'

init: command 'loglevel' r=0

init: command 'export' r=0

init: command 'insmod' r=0

PA FB = 0x49B00000, bits per pixel = 32

screen width=800 height=480 va=0xe9b00000 pa=0x49b00000

Back frameBuffer[0].VAddr=e9c77000 PAddr=49c77000 size=1536000

init: command 'insmod' r=0

s3c_get_media_memory_bank : invalid media device(id:9,bank:0)

init: command 'insmod' r=0

init: command 'symlink' r=0

init: command 'mkdir' r=0

init: command 'mount' r=-1

init: command 'mkdir' r=0

init: command 'symlink' r=0

init: command 'mkdir' r=-17

init: command 'mkdir' r=0

init: command 'mount' r=0

init: command 'write' r=0

init: command 'mkdir' r=0

init: command 'mount' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'write' r=-22

init: command 'mkdir' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'write' r=0

init: command 'mkdir' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'write' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'mkdir' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'copy' r=-1

init: command 'chown' r=-2

init: command 'chmod' r=-2

init: command 'copy' r=-1

init: command 'chown' r=-2

init: command 'chmod' r=-2

init: command 'write' r=-2

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'chown' r=-2

init: command 'chmod' r=-2

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'mkdir' r=0

init: command 'mkdir' r=-17

init: command 'mkdir' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'mkdir' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'mkdir' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'chown' r=0

init: command 'chmod' r=0

init: Created socket '/dev/socket/property_service' with mode '666', user '0', gro'

init: processing action 0x2aab0 (boot)

init: command 'ifup' r=0

init: command 'hostname' r=0

init: command 'domainname' r=0

init: command 'setprop' r=0

init: command 'insmod' r=-1

init: command 'setrlimit' r=0

init: command 'setprop' r=0

init: command 'write' r=0

init: command 'chown' r=-2

init: command 'chown' r=0

init: command 'chmod' r=0

init: command 'chown' r=-2

init: command 'chown' r=0

init: command 'chown' r=-2

init: command 'chown' r=0

init: command 'setprop' r=0

init: starting 'console'

init: starting 'pvrsrvinit'

init: starting 'servicemanager'

init: starting 'vold'

init: starting 'netd'

init: starting 'debuggerd'

init: starting 'zygote'

init: starting 'media'

init: starting 'dbus'

init: starting 'ifcfg_eth0'

init: starting 'installd'

init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'

init: starting 'keystore'

init: starting 'dhcpcd'

init: command 'class_start' r=0

init: processing action 0x2b858 (property:persist.service.adb.enable=1)

init: starting 'adbd'

init: command 'start' r=0

PVR_K:(Warning): SysFinalise: Version string: SGX540 S5PC110 [473, services4/syste]

init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'

init: waitpid returned pid 891, status = 00000000

init: process 'pvrsrvinit', pid 891 exited

init: Created socket '/dev/socket/vold' with mode '660', user '0', group '1009'

sh-4.0# init: Created socket '/dev/socket/dbus' with mode '666', user '1002', grou'

net eth0: SMSC911x/921x identified at 0xeb8a6000, IRQ: 43

init: Created socket '/dev/socket/zygote' with mode '666', user '0', group '0'

init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1'

init: Created socket '/dev/socket/keystore' with mode '666', user '0', group '0'

warning: `dhcpcd' uses 32-bit capabilities (legacy support in use)

enabling adb

adb_open

s3c-fimc: FIMC2 1 opened.

init: starting 'bootanim'

init: waitpid returned pid 899, status = 0000ff00

init: process 'ifcfg_eth0', pid 899 exited

request_suspend_state: wakeup (3->0) at 87559646103 (2010-12-29 11:31:55.614276321)

binder: release 1056:1056 transaction 2082 out, still active

binder: 953:1089 transaction failed 29189, size 4-0

binder: send failed reply for transaction 2082, target dead

init: service 'bootanim' is being killed

init: waitpid returned pid 966, status = 0000000f

init: process 'bootanim', pid 966 exited

binder: release 1122:1143 transaction 2865 out, still active

[출처] init.rc 의 boot log level 변경|작성자 Falloutboy

공유하기 링크

페이스북
카카오스토리
트위터

'프로그래밍/Embeded S/W' Related Articles

Comments

날마다 새롭게 또 날마다 새롭게

maple210 정상 부팅 로그 본문

maple210 정상 부팅 로그

티스토리툴바